Clicking on the ceiling fan remote repeatedly is not the appropriate approach to troubleshoot an operations issue. Fans that shut off or alter rates randomly likely have a settings issue. The fan’s dip switch settings have to be arranged to receive and carry the functions you pick with the controller. Placing more than one fan in near proximity also affects the fan’s performance. The cooling effects with no pulling on the cord. Difference could be made by A few alterations to a dip switch.
Remove from the controller, then remove the battery. Locate and eliminate a panel that covers the dip switches. Examine and remember the four switch configurations. Note which switches read”On” and”Off.”
Turn off the ceiling fan in the power supply and the fan. Flip the breaker controlling the fan to the”Off” position.
Stand on a stepladder or a sturdy chair to reach the ceiling fan. Remove the glass light cover by slipping the world or unscrewing the screws. Skip this step if your ceiling fan has no light kit. Instead, eliminate the cap in the middle of the fan.
Look for a rectangular or square-shaped receiver box. Remove the recipient box cover to look at the dip switch settings. You will see four buttons that are sliding. The button configuration must match the configuration of the remote control. Change the dip switch settings if necessary, moving all the four switches into the matching”On” or”Off” settings.
Change the dip switch configurations of fans inside a close proximity of fans. Each fan needs a different frequency — a function. Pair up dip switch configurations between the remotes and the fan that control them.
Close the ceiling fan receiver board. Replace the world , screwing it into place. Remove the ladder and turn on the power. Test your remote controller to validate are right.
Related Posts
